{"id":1866,"date":"2026-01-22T13:38:30","date_gmt":"2026-01-22T18:38:30","guid":{"rendered":"https:\/\/www.solopcms.com\/blog\/?p=1866"},"modified":"2026-03-19T10:33:35","modified_gmt":"2026-03-19T14:33:35","slug":"where-can-i-get-my-pcm-reprogrammed","status":"publish","type":"post","link":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/","title":{"rendered":"Where Can I Get My PCM Reprogrammed?"},"content":{"rendered":"\n<p>If you\u2019re asking yourself, &#8220;<a href=\"https:\/\/www.solopcms.com\/blog\/ecm-flash-programming-services-questions\/\">where can I get my pcm reprogrammed<\/a>?&#8221;, start by confirming that software (not hardware) is the constraint. Perform<a href=\"https:\/\/www.solopcms.com\/blog\/ecm-testing-near-me-nationwide-service\/\"> ECM testing<\/a> and basic electrical checks (power, ground, network integrity, sensor plausibility) before any Reprogramming Service. When outdated calibration is the root cause, updating the Powertrain Control Module can restore drivability, shift quality, emissions readiness, and fuel economy.<\/p>\n\n\n\n<p>Identify the module location prior to removal or shipping. Depending on the platform, the PCM may be mounted on the fender, firewall, cowl, or near the under-hood fuse block.<a href=\"https:\/\/www.solopcms.com\/blog\/where-is-the-ecm-pcm-located\/\"> Accurate identification<\/a> prevents connector damage and ensures the correct ECM Programming sequence, immobilizer alignment, and post-flash relearns.<\/p>\n\n\n\n<p>Reflashing is indicated after PCM replacement, major component changes (engine, transmission, injectors, throttle body), VIN mismatches, security updates, or when DTCs reference calibration issues. It is also appropriate for post-repair drivability complaints (hard starts, misfires after parts changes, or monitors that will not set) where verified reprogramming services load the correct file, validate checksums, perform VIN write when required, and confirm network communication.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Table of Contents<\/strong><\/h2>\n\n\n\n<ul>\n<li><a href=\"#how-solo-reprograms-your-pcm\">How SOLO Reprograms Your PCM (Process Overview)<\/a><\/li>\n\n\n\n<li><a href=\"#mail-in-vs-on-site-options-and-turnaround\">Mail-In vs. On-Site Options and Turnaround<\/a><\/li>\n\n\n\n<li><a href=\"#supported-vehicles-and-procedures\">Supported Vehicles and Procedures<\/a><\/li>\n\n\n\n<li><a href=\"#what-to-include-when-you-send-a-module\">What To Include When You Send a Module<\/a><\/li>\n\n\n\n<li><a href=\"#ready-for-a-clean-verified-reflash\">Ready for a Clean, Verified Reflash<\/a><\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading table-title-with-anhor\" id=\"how-solo-reprograms-your-pcm\"><strong>How SOLO Reprograms Your PCM (Process Overview)<\/strong><\/h2>\n\n\n\n<p><strong>Objective:<\/strong> Apply the correct calibration at the OEM level while preserving network integrity and verifiable data.<\/p>\n\n\n\n<p>Before any write, technicians connect diagnostic tools and scan tools to capture DTCs, VIN, calibration ID, and live<a href=\"https:\/\/www.sinocastel.com\/do-you-know-what-is-pid\/\"> PID data<\/a>. A stable power supply is attached, and battery voltage is monitored continuously. To ensure version accuracy and compatibility, the target software update is confirmed against the vehicle manufacturer&#8217;s database.<\/p>\n\n\n\n<p>The<a href=\"https:\/\/www.csselectronics.com\/pages\/can-bus-simple-intro-tutorial\"> CAN<\/a> network is then checked for proper voltage, resistance, and message activity. Power and ground paths and connector condition are verified to prevent write interruptions. The service laptop\u2019s operating system is configured for the session, sleep and power-saving features are disabled, and OEM-level service software or an approved pass-through utility is launched.<\/p>\n\n\n\n<p>Calibration write and validation proceed with the approved file at<a href=\"https:\/\/wiki.teltonika-gps.com\/view\/OEM_Parameters\"> OEM parameters<\/a>. If required, VIN programming and security or immobilizer alignment are completed. Post-flash, the module is key-cycled per instructions, and the system is rescanned; PID data, freeze frames, and readiness monitors are reviewed to confirm expected behavior across the CAN bus.<\/p>\n\n\n\n<p>For quick reference, the process covers:<\/p>\n\n\n\n<ul>\n<li>Pre-flash capture of DTCs, VIN, calibration ID, and critical PID logs<\/li>\n\n\n\n<li>Network integrity checks on CAN high\/low, plus power and ground verification<\/li>\n\n\n\n<li>OEM-level file selection, checksum validation, and guided ignition state changes<\/li>\n\n\n\n<li>Post-flash relearns (throttle\/transmission\/fuel trims) and readiness verification<\/li>\n<\/ul>\n\n\n\n<p>Finally, the calibration ID and checksum are documented, along with any required drive-cycle guidance. This mix of OEM-level software control and precise network checks helps ensure the PCM accepts the update cleanly and the vehicle operates to specification.<\/p>\n\n\n\n<h2 class=\"wp-block-heading table-title-with-anhor\" id=\"mail-in-vs-on-site-options-and-turnaround\"><strong>Mail-In vs. On-Site Options and Turnaround<\/strong><\/h2>\n\n\n\n<p>Choosing between mail-in and on-site support depends on your timeline, access to the vehicle, and which<a href=\"https:\/\/www.solopcms.com\/blog\/car-modules-explained\/\"> car modules<\/a> need attention. Both paths target a clean software update on the engine control module (ECM\/PCM) with network integrity checks, stable power, and post-flash verification of Diagnostic Trouble Codes and engine operation.<\/p>\n\n\n\n<p><strong>Mail-In (Module-Only)<\/strong><br>Send the PCM or related modules when the vehicle can\u2019t be present. This works well after repairs or when isolating an engine control concern. On receipt, the unit is inspected, a version check is performed, and the correct calibration is applied. The module is returned with documentation for install, relearns, and any drive-cycle guidance needed to set monitors.<\/p>\n\n\n\n<p><strong>On-Site (Vehicle Present)<\/strong><br>Ideal when you need to validate changes on the vehicle and confirm live data immediately. The session includes CAN bus checks, battery support, OEM-level file authentication, and a guided flash. After the write, the vehicle is restarted per procedure and Diagnostic Trouble Codes are cleared and rechecked while monitoring key PIDs.<\/p>\n\n\n\n<p><strong>What Determines Turnaround<\/strong><\/p>\n\n\n\n<ul>\n<li>Module condition and connector integrity<\/li>\n\n\n\n<li>Access to the latest software update from the manufacturer<\/li>\n\n\n\n<li>Security alignment or<a href=\"https:\/\/www.autocheck.com\/vehiclehistory\/vin-basics\"> VIN<\/a> write requirements<\/li>\n\n\n\n<li>Post-flash relearns affecting engine operation (idle, throttle, transmission)<\/li>\n<\/ul>\n\n\n\n<p><strong>What to Include (Mail-In)<\/strong><\/p>\n\n\n\n<ul>\n<li>VIN, module part number, current calibration ID<\/li>\n\n\n\n<li>Symptom list and relevant DTCs<\/li>\n\n\n\n<li>Notes on recent part changes affecting engine control (injectors, throttle body, transmission)<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading table-title-with-anhor\" id=\"supported-vehicles-and-procedures\"><strong>Supported Vehicles and Procedures<\/strong><\/h2>\n\n\n\n<p>Coverage spans domestic and import platforms from major vehicle manufacturer lines across gasoline, diesel, and many hybrid applications. Procedures focus on safe ECU Programming, calibrated updates, and communication integrity. When immobilizer or key systems are involved, a compliant security solution is applied with proper documentation.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td><strong>Vehicle Category<\/strong><\/td><td><strong>Common Modules (Examples)<\/strong><\/td><td><strong>Typical Procedures<\/strong><\/td><td><strong>Notes<\/strong><\/td><\/tr><tr><td>U.S. Domestic (GM, Ford, Stellantis)<\/td><td>PCM\/ECM, TCM, BCM, ABS<\/td><td>ECU Programming, VIN write, immobilizer alignment, post-flash relearns<\/td><td>Supports legacy J1850\/CAN and newer CAN-FD where applicable<\/td><\/tr><tr><td>European (VW\/Audi, BMW\/MINI, Mercedes, Volvo)<\/td><td>ECU\/ECM, DME\/DDE, TCU, Gateway<\/td><td>Calibration update, variant coding, network health check<\/td><td>Follow model-specific power management and gateway routines<\/td><\/tr><tr><td>Asian (Toyota\/Lexus, Honda\/Acura, Nissan\/Infiniti, Hyundai\/Kia)<\/td><td>ECM\/PCM, TCM, Smart Key\/Immobilizer<\/td><td>Emissions calibration update, key registration, readiness verification<\/td><td>Strict battery support and connector handling required<\/td><\/tr><tr><td>Light Diesel (Duramax, Power Stroke, Cummins)<\/td><td>ECM, TCM, Aftertreatment controllers<\/td><td>DEF\/aftertreatment calibration, torque management updates<\/td><td>Document drive-cycle steps for monitor completion<\/td><\/tr><tr><td>Fleet\/Commercial (Vans, Police\/Utility)<\/td><td>PCM\/ECM, Body\/Upfitter modules<\/td><td>Configuration sync, auto computer reprogramming services, network validation<\/td><td>Preserve upfitter settings during reflash<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Included capabilities:<\/p>\n\n\n\n<ul>\n<li>ECU Programming for PCM\/ECM\/TCM with checksum validation and calibration ID verification<\/li>\n\n\n\n<li>VIN programming, immobilizer\/key alignment as part of a documented security solution<\/li>\n\n\n\n<li>Post-flash relearns (idle, throttle, transmission), readiness monitor verification<\/li>\n\n\n\n<li>Targeted<a href=\"https:\/\/www.solopcms.com\/blog\/ecu-repair-vs-replacement-ecu-replacement-cost\/\"> ECU Repair<\/a> guidance when software symptoms overlap with hardware faults<\/li>\n<\/ul>\n\n\n\n<p>When to request a procedure:<\/p>\n\n\n\n<ul>\n<li>Module replacement or cross-platform swaps requiring coding\/calibration<\/li>\n\n\n\n<li>Emissions or drivability updates issued by the vehicle manufacturer<\/li>\n\n\n\n<li>Communication faults resolved after network and power-ground integrity checks<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading table-title-with-anhor\" id=\"what-to-include-when-you-send-a-module\"><strong>What To Include When You Send a Module<\/strong><\/h2>\n\n\n\n<p>For accurate PCM\/ECM work across different model vehicles, include clear identifiers and fault details so the calibration and verification steps are correct. This helps isolate software-related drivability or transmission issues from wiring or hardware faults and protects vehicle security during handling.<\/p>\n\n\n\n<ul>\n<li><strong>Identification &amp; context:<\/strong> VIN, module part number, current calibration ID, mileage, and a short symptom log (include Diagnostic Trouble Codes if available). Note recent repairs affecting engine or transmission, and whether issues began after a software update.<\/li>\n\n\n\n<li><strong>Operating environment<\/strong>: Battery\/charging status, aftermarket electronics, and network notes. For connected fleets or telematics-equipped units, attach relevant documentation (e.g., APN or autonomous system number references if your IT policy tracks them) so communication settings aren\u2019t disrupted.<\/li>\n\n\n\n<li><strong>Installation details for auto repair shops:<\/strong> Photos of connectors and harness routing, immobilizer\/key info needed for vehicle security, and any shop notes on prior programming attempts or auto computer reprogramming services.<\/li>\n<\/ul>\n\n\n\n<p>Package modules in anti-static material with cushioned support and label connectors to prevent bent pins. Clear documentation reduces turnaround and ensures the module is validated for the specific model vehicles involved.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-large\"><a href=\"https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools.jpg\"><img decoding=\"async\" width=\"1024\" height=\"683\" data-id=\"1867\" src=\"https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools-1024x683.jpg\" alt=\"Technician inspecting engine bay components with scan tools before PCM reprogramming,  where can i get my pcm reprogrammed\n\n\" class=\"wp-image-1867\" title=\"Where Can I Get My PCM Reprogrammed? Engine Bay Scan Tools\" srcset=\"https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools-1024x683.jpg 1024w, https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools-300x200.jpg 300w, https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools-768x512.jpg 768w, https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools-1536x1024.jpg 1536w, https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-engine-bay-scan-tools.jpg 1999w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/a><\/figure>\n<\/figure>\n\n\n\n<h2 class=\"wp-block-heading table-title-with-anhor\" id=\"ready-for-a-clean-verified-reflash\"><strong>Ready for a Clean, Verified Reflash<\/strong><\/h2>\n\n\n\n<p>Modern drivability problems often trace back to calibration, network, or security alignment, not just parts. With proper ECM testing, CAN integrity checks, and OEM-level programming, you can resolve lingering DTCs, restore stable engine operation, and protect vehicle security without guesswork. If you\u2019re still asking, <em>\u201cWhere can I get my PCM reprogrammed?<\/em>\u201d, make sure the process includes version verification, VIN\/security alignment, and post-flash validation.<\/p>\n\n\n\n<p>Submit a request at<a href=\"https:\/\/www.solopcms.com\/auto-computer-repair\/\"> SOLO&#8217;s repair center<\/a> to get your car running like new.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019re asking yourself, &#8220;where can I get my pcm reprogrammed?&#8221;, start by confirming that software (not hardware) is the constraint. Perform ECM testing and basic electrical checks (power, ground, network integrity, sensor plausibility) before any Reprogramming Service. When outdated calibration is the root cause, updating the Powertrain Control Module can restore drivability, shift quality,&hellip;<\/p>\n","protected":false},"author":1,"featured_media":1868,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[70,44],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v21.9 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Where Can I Get My PCM Reprogrammed? - Solo Auto Electronics<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Where Can I Get My PCM Reprogrammed? - Solo Auto Electronics\" \/>\n<meta property=\"og:description\" content=\"If you\u2019re asking yourself, &#8220;where can I get my pcm reprogrammed?&#8221;, start by confirming that software (not hardware) is the constraint. Perform ECM testing and basic electrical checks (power, ground, network integrity, sensor plausibility) before any Reprogramming Service. When outdated calibration is the root cause, updating the Powertrain Control Module can restore drivability, shift quality,&hellip;\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/\" \/>\n<meta property=\"og:site_name\" content=\"Solo Auto Electronics\" \/>\n<meta property=\"article:published_time\" content=\"2026-01-22T18:38:30+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-03-19T14:33:35+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-mechanic-oem-diagnostics-laptop.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1999\" \/>\n\t<meta property=\"og:image:height\" content=\"1331\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/\",\"url\":\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/\",\"name\":\"Where Can I Get My PCM Reprogrammed? - Solo Auto Electronics\",\"isPartOf\":{\"@id\":\"https:\/\/www.solopcms.com\/blog\/#website\"},\"datePublished\":\"2026-01-22T18:38:30+00:00\",\"dateModified\":\"2026-03-19T14:33:35+00:00\",\"author\":{\"@id\":\"https:\/\/www.solopcms.com\/blog\/#\/schema\/person\/d25e7d70e8f227111d51970d51666244\"},\"breadcrumb\":{\"@id\":\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.solopcms.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Where Can I Get My PCM Reprogrammed?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.solopcms.com\/blog\/#website\",\"url\":\"https:\/\/www.solopcms.com\/blog\/\",\"name\":\"Solo Auto Electronics\",\"description\":\"Your #1 Resource for Remanufactured Auto Computer Engines\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.solopcms.com\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.solopcms.com\/blog\/#\/schema\/person\/d25e7d70e8f227111d51970d51666244\",\"name\":\"admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.solopcms.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/af5dc19114c8430ad10fbed8e2fe6645?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/af5dc19114c8430ad10fbed8e2fe6645?s=96&d=mm&r=g\",\"caption\":\"admin\"},\"url\":\"https:\/\/www.solopcms.com\/blog\/author\/admin\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Where Can I Get My PCM Reprogrammed? - Solo Auto Electronics","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/","og_locale":"en_US","og_type":"article","og_title":"Where Can I Get My PCM Reprogrammed? - Solo Auto Electronics","og_description":"If you\u2019re asking yourself, &#8220;where can I get my pcm reprogrammed?&#8221;, start by confirming that software (not hardware) is the constraint. Perform ECM testing and basic electrical checks (power, ground, network integrity, sensor plausibility) before any Reprogramming Service. When outdated calibration is the root cause, updating the Powertrain Control Module can restore drivability, shift quality,&hellip;","og_url":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/","og_site_name":"Solo Auto Electronics","article_published_time":"2026-01-22T18:38:30+00:00","article_modified_time":"2026-03-19T14:33:35+00:00","og_image":[{"width":1999,"height":1331,"url":"https:\/\/www.solopcms.com\/blog\/wp-content\/uploads\/2026\/01\/where-can-i-get-my-pcm-reprogrammed-mechanic-oem-diagnostics-laptop.jpg","type":"image\/jpeg"}],"author":"admin","twitter_misc":{"Written by":"admin","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/","url":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/","name":"Where Can I Get My PCM Reprogrammed? - Solo Auto Electronics","isPartOf":{"@id":"https:\/\/www.solopcms.com\/blog\/#website"},"datePublished":"2026-01-22T18:38:30+00:00","dateModified":"2026-03-19T14:33:35+00:00","author":{"@id":"https:\/\/www.solopcms.com\/blog\/#\/schema\/person\/d25e7d70e8f227111d51970d51666244"},"breadcrumb":{"@id":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.solopcms.com\/blog\/where-can-i-get-my-pcm-reprogrammed\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.solopcms.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Where Can I Get My PCM Reprogrammed?"}]},{"@type":"WebSite","@id":"https:\/\/www.solopcms.com\/blog\/#website","url":"https:\/\/www.solopcms.com\/blog\/","name":"Solo Auto Electronics","description":"Your #1 Resource for Remanufactured Auto Computer Engines","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.solopcms.com\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.solopcms.com\/blog\/#\/schema\/person\/d25e7d70e8f227111d51970d51666244","name":"admin","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.solopcms.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/af5dc19114c8430ad10fbed8e2fe6645?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/af5dc19114c8430ad10fbed8e2fe6645?s=96&d=mm&r=g","caption":"admin"},"url":"https:\/\/www.solopcms.com\/blog\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/posts\/1866"}],"collection":[{"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/comments?post=1866"}],"version-history":[{"count":2,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/posts\/1866\/revisions"}],"predecessor-version":[{"id":1871,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/posts\/1866\/revisions\/1871"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/media\/1868"}],"wp:attachment":[{"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/media?parent=1866"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/categories?post=1866"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.solopcms.com\/blog\/wp-json\/wp\/v2\/tags?post=1866"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}